Panasonic AJ-PD500P - Setting the Year, Month, Day, and Time

Preparation: Setting the Year, Month, Day, and Time
21
Preparation
Setting the Year, Month, Day, and Time
Set the clock before using the unit the first time.
1 Press the [ ] button on the unit to turn on the
power.
2 Press the [MENU] button to open the menu.
(➝ “Menu Operations” page 79)
3 Use the cursor buttons to select the “I/F SETUP” -
“CLOCK” (➝ page 91) menu item and then press the
[SET] button.
The clock setting screen appears. The default values are
the current time settings.
4 Use the left and right cursor buttons to select the dig-
its to be set.
• Display is in the order of hour/minute/month/day/year/
time zone.
• For the time zone, set the difference in hours from Green-
wich Mean Time.
• The time is displayed in the 24-hour format.
5 Use the up and down cursor buttons to set the year,
month, day, time, and time zone.
6 After configuring the settings, press the [SET] button.
Pressing the [SET] button sets the clock to the changed
time.
Note:
• The clock is affected by deviation so check that the time is
correct before use.
• When an accurate time is required, check and reset the time
before use.
 Time zone
Time
difference
Area
Time
difference
Area
00:00 Greenwich +01:00 Central Europe
-00:30 +01:30
-01:00 Azores Islands +02:00 Eastern Europe
-01:30 +02:30
-02:00 Mid-Atlantic +03:00 Moscow
-02:30 +03:30 Tehran
-03:00 Buenos Aires +04:00 Abu Dhabi
-03:30 Newfoundland
Island
+04:30 Kabul
-04:00 Halifax +05:00 Islamabad
-04:30 +05:30 Bombay
-05:00 New York +06:00 Dacca
-05:30 +06:30 Yangon
-06:00 Chicago +07:00 Bangkok
-06:30 +07:30
-07:00 Denver +08:00 Beijing
-07:30 +08:30
-08:00 Los Angeles +09:00 Tokyo
-08:30 +09:30 Darwin
-09:00 Alaska +10:00 Guam
-09:30 Marquesas
Islands
+10:30 Lord Howe Island
-10:00 Hawaii +11:00 Solomon Islands
-10:30 +11:30 Norfolk Island
-11:00 Midway Island +12:00 New Zealand
-11:30 +12:45 Chatham Islands
-12:00 Kwajalein +13:00
+00:30