Setup Menu: Menu List
97
_ is the factory default setting.
WFM POSI
Selects the display position for the waveform monitor.
RIGHT/TOP
: Positioned at top right.
LEFT/TOP: Positioned at top left.
RIGHT/BOTTOM: Positioned at bottom right.
LEFT/BOTTOM: Positioned at bottom left.
Note:
The display on the LCD monitor moves left or right only.
4:3 MARKER
Sets whether to display the 4:3 marker on the LCD monitor.
ON: Displays.
OFF
: Does not display.
LCD MONITOR
Item Settings and brief function description FREQ indications
TIME OUT
Turns off the backlight of the LCD monitor automatically if a set time (approximately 5 min-
utes) elapses after any operation is performed.
5min: Turns off the backlight of the LCD monitor automatically after approximately 5 minutes.
OFF
: Does not turn off the backlight of the LCD monitor.
BACKLIGHT
Adjusts the brightness of the LCD monitor backlight.
-3: Darkest
l
0
: Normal brightness
1: Brighter than normal
BRIGHTNESS
Adjusts the brightness of the LCD monitor.
-15 to 0
to 15
COLOR LEVEL
Adjusts the color level of the LCD monitor.
-15 to 0
to 15
CONTRAST
Adjusts contrast of the LCD monitor.
-30 to 0
to 30
Note:
This value multiplied by the R, G, and B contrast setting becomes the contrast adjustment
value for R, G, and B.
R CONTRAST
Adjusts the R (Red) contrast of the LCD monitor.
-30 to 0
to 30
Note:
This setting multiplied by the “CONTRAST” setting becomes the contrast setting.
G CONTRAST
Adjusts the G (Green) contrast of the LCD monitor.
-30 to 0
to 30
Note:
This setting multiplied by the “CONTRAST” setting becomes the contrast setting.
B CONTRAST
Adjusts the B (Blue) contrast of the LCD monitor.
-30 to 0
to 30
Note:
This setting multiplied by the “CONTRAST” setting becomes the contrast setting.
Item Settings and brief function description FREQ indications
To Next Page
Loading...
