10
2-2. Basic settings for Detail
General Settings: Main Menu [SCENE FILE] (Factory default settings underlined)
[MASTER DTL] -31 - - - 0 - - - 31
Adjusts the level of overall Detail effect.
[DTL CORING] 0 - - - 1 - - - 60
Sets the level of signal (including noise) that suppresses the Detail effect.
More Detailed Settings: Main Menu [SCENE FILE] [DETAIL SETTING]
[DETAIL] ON / OFF
Selects whether to add the Detail or not.
[V.DTL LEVEL］ -7 - - - 0 - - - 7
Sets the intensity of Detail level in the vertical direction.
[H.DTL FREQ.］ -7 - - - 0 - - - 7
Sets the thickness of Detail in the horizontal direction.
[V.DTL FREQ.］ 0 - - - 1 - - - 2
Sets the thickness of Detail in the vertical direction.
[LEVEL DEPEND.］ -7 - - - 0 - - - 7
When the Detail of luminance signal is intensified, the Details of darker areas are compressed.
If this setting value is larger, the Details of brighter areas will also be compressed.
[KNEE APELVL］ 0 - - - 2 - - - 5
Sets the Detail level of high-luminance areas (very bright areas).
[DTL GAIN（+）］ -31 - - - 0 - - - 31
Sets the Detail level in the positive (brightening) direction separately.
[DTL GAIN（−）］ -31 - - - 0 - - - 31
Sets the Detail level in the negative (darkening) direction separately.
To Next Page
Loading...
