Panasonic AJ-PX230 - OUTPUT SEL Menu; USB SETUP Menu

49
OUTPUT SEL menu
Menu item Description Setting (factory default)
SDI OUT Turn ON/OFF SDI OUTPUT. ON / OFF
SDI&HDMI SELECT
Select signal format from SDI and HDMI
OUT terminals.
SYSTEM MODE: Follow system setting
1080i:Output 1080i when in 1080p mode
DOWNCON: Down convert to SDTV format
3G-SDI OUT
Set 1080p signal output format of HD SDI
OUT.
LEVEL-A / LEVEL-B (LEVEL-B DL)
SDI OUT CHAR
Superimpose characters on video from
SDI OUT.
ON / OFF
SDI EDH
Add Error Detection and Handling (EDH)
signal to SDI OUT in 480i or 576i mode.
ON / OFF
HD SDI REMOTE
Output REC/PAUSE trigger signal from
SDI OUT.
ON / OFF
DOWNCON MODE
Set the display mode of down converted
image from SDI OUT in 1080p, 1080i,
720p mode.
SIDE CROP / LETTER BOX / SQUEEZE
DOWNCON
SETTING
DETAIL
Turn ON/OFF image contour correction to
down converted image.
ON / OFF
H.DTL
LEVEL
Adjust down converted image contour
correction level for horizontal direction.
0 – 8 – 31
V.DTL
LEVEL
Adjust down converted image contour
correction level for vertical direction.
0 – 8 – 31
DTL
CORING
Adjust threshold level of down converted
image contour correction.
0 – 1 – 15
H.DTL
FREQ
Set thickness of contour correction signal
for horizontal direction.
2.5MHz / 3MHz / 3.5MHz / 4MHz / 4.5MHz
USB SETUP menu
Menu item Description Setting (factory default)
USB MODE Turn ON/OFF USB connection mode ON / OFF