Panasonic AJ-PX230 - Using a Preset Color Look: Matrix Settings

26
4-4. Using a preset color look : Matrix settings
For more active changes of coloring, the color look can be selected from the preset Matrix Table.
Calling of Matrix settings: Main Menu  [SCENE FILE]  [MATRIX] (Factory default settings underlined)
[MATRIX］ NORM 1 / NORM 2 / FLUO / CINELIKE
NORM1
This expresses the colors suitable for shooting in the open air or under
the halogen lamp.
Generally, this color look is preferred in NTSC areas such as Japan and
North America.
NORM2
This enables the coloring suitable for shooting in the open air or under
the halogen lamp.
And it has richer color saturation than NORM1.
Generally, this color look is preferred in PAL areas such as Europe.
FLUO
This expresses the colors suitable for shooting indoors under the
fluorescent lamp.
This is suitable for shooting in the condition of poor color-reproduction
under the bluish light from fluorescent lamp.
CINELIKE
This expresses the colors suitable for shooting a movie-like picture.
When you have selected the Gamma, select and use this Matrix setting.
Adjustment items for Matrix: Main Menu  [SCENE FILE]  [MATRIX SETTING]
(Factory default settings underlined)
[MATRIX R-G］[MATRIX R-B］[MATRIX G-R］[MATRIX G-B］[MATRIX B-R］[MATRIX B-G］
-63・・・0・・・63
EX)
[MATRIX R-G] adjusted in positive direction
and [MATRIX B-G] in negative direction