42
RECORDING SETUP menu
Menu item Description Setting (factory default)
FILE SPLIT Set record file format
ONE FILE: each clip data is recorded as a
single file without splitting (LongG codecs
only)
SPLIT: each clip data splitted at every 4GB
SHORT SPLIT:each clip data is splitted at
every 128 seconds
RECORDING Set record modes
NORMAL: normal mode
INTERVAL: time-lapse mode
ONE SHOT: record specified duration and
stop
LOOP: endless record mode using 2 P2
cards
RECORDING
SETTING
RECORDING
HOLD
Retain setting of RECORDING item
after power OFF and ON
ON: retain record mode setting
OFF: Back to normal mode after power ON
ONE SHOT
TIME
Set record duration of ONE SHOT
record mode
1frm / 2frm / 4frm / 8frm / 16frm / 1s
INTERVAL
TIME
Set record interval time (pause time) of
Time-laps recording.
2frm / 4frm / 8frm / 16frm / 1s / 2s / 5s / 10s
/ 30s / 1min / 5min / 10min
START
DELAY
In INTERVAL and ONE SHOT modes.
Delay the record start time for 1 second
ON / OFF
PRE REC
Turn ON/OFF the pre-record mod. This
mode allows the camera to start
recording the video and audio (approx.
3 sec in the HD mode, 7 sec in the SD
mode) before rec button is pressed.
ON / OFF
ONE CLIP REC
Turn ON/OFF a record mode that
allows multiple clips as a single
successive clip.
ON / OFF
SIMUL REC
Turn ON/OFF the record mode that
allows simultaneous redundant
recordings with 2 microP2 cards.
(See P.43)
ON / OFF
BACKGROUND REC
Turn ON/OFF the record mode that
allows simultaneous recordings.
(See P.43)
ON / OFF
START TEXT MEMO Leave text memo when record starts ON / OFF
TIME STAMP
Allow recording of superimposed date
and time on the image.
ON / OFF
DF MODE Set timecode drop frame mode DF / NDF
TCG Set timecode count mode FREE RUN / REC RUN