34
SCENE FILE menu
Menu item Description Setting (factory default)
FILE SELECT Recall scene files F1 - F6
NAME EDIT Edit scene file name ---
LOAD / SAVE / INITIALIZE
Load/save custom scene files to/from SD memory
cards, and initialize.
---
VFR Turn ON/OFF variable frame record mode. ON / OFF
FRAME RATE
Adjust frame rate when VFR is ON. Adjustable range
is from 1fps to 60fps.
Adjustable range and
steps vary depending on
system frequency setting.
SYNC SCAN TYPE
Set display unit for shutter speed in synchro scan
mode.
sec / deg
SYNCHRO SCAN Set shutter speed for synchro scan mode. ---
MASTER DTL
Adjust image contour correction level for entire
image.
-31 – 0 – 31
DTL CORING Adjust threshold level of image contour correction. 0 – 1 – 60
DETAIL
SETTING
DETAIL Turn ON/OFF contour correction. ON / OFF
V.DTL LEVEL
Adjust image contour correction level for vertical
direction.
-7 – 0 – 7
H.DTL FREQ.
Set thickness of contour correction signal for
horizontal direction.
-7 – 0 – 7
V.DTL FREQ.
Set thickness of contour correction signal for vertical
direction.
0 / 1 / 2
LEVEL DEPEND
Set compression level of contour correction signal for
bright part. (Compression level becomes higher by
increasing the value.)
-7 – 0 – 7
KNEE APE LVL Set knee compression level for a very bright part. OFF / 1 / 2 / 3 / 4 / 5
DTL GAIN (+)
Adjust image contour correction level for + (brighter)
direction.
-31 – 0 – 31
DTL GAIN (-)
Adjust image contour correction level for - (darker)
direction.
-31 – 0 – 31
SKIN TONE DTL A
Choose tables from A, B, and C to be used for
softness effect for a certain color tone (fresh tone).
Tables can be edited in DETECT TABLE item.
ON / OFF SKIN TONE DTL B
SKIN TONE DTL C
SKIN TONE ZEBRA
Turn ON/OFF zebra indicator (for fresh tone effect) on
the viewfinder display.
ON / OFF
To Next Page
Loading...
