35
SCENE FILE menu (continued)
Menu item Description Setting (factory default)
SKIN TONE
DTL SETTING
DETECT TABLE Select a fresh tone table (parameter group) A / B / C
SKIN TONE GET
Obtain color information (I/Q width, I center, Q
phase) from subjects located around the center
marker, then store to selected table.
---
SKIN DTL EFFECT
Set fresh tone (softness effect for a certain color
tone) level.
0 – 16 – 31
I CENTER
Adjust center position of the I AXIS for fresh tone
control. (see following figure)
0 – 35 – 255
I WIDTH
Adjust range of the color adjustment on I AXIS
from a point set as I CENTER. (see following
figure)
0 – 55 – 255
Q WIDTH
Adjust range of the color adjustment on Q AXIS
from a point set as I CENTER. (see following
figure)
0 – 10 – 90
Q PHASE Adjust color phase. (see following figure) -180 – 0 – 179
Adjustmet range of SKIN TONE DTL settings
Q Axis
I Axis
To Next Page
Loading...
