60
2. USER assignable functions
Item Effect
INHIBIT Assign no function
SCENE FILE SEL Select scene files
LEVEL GAUGE Turn ON/OFF level gauge display
LEVEL GAUGE RESET
Set current vertical and horizontal level to zero on the level gauge.
Keep press the USER button to clear.
WFM
Turn ON/OFF waveform monitor display.
Display type can be selected from MAIN MENU > SW MODE > WFM MODE
D.ZOOM Enable digital zoom (x2, x5, x10)
DRS Turn ON/OFF dynamic range stretcher
FBC Turn ON/OFF flash-band compensation
S.GAIN
Turn ON/OFF super gain (higher than 24dB) mode
Gain value can be selected from MAIN MENU > SW MODE > SUPER GAIN
1S.EXP. Turn ON/OFF long time (1 second) exposure function.
ATW Turn ON/OFF auto tracking white balance adjustment
ATW LOCK
Fix white balance while auto tracking white balance control (ATW) is working.
Press the USER button again to release its fixing.
SPOTLIGHT Set auto iris control to “spot light (when subject is flooded with light)” mode.
BACKLIGHT Set auto iris control to “back light (when subject is lit from behind)” mode.
BLACKFADE Perform fading out image to black.
WHITEFADE Perform fading out image to white.
A.IRIS LEVEL
Set reference (target) level of auto iris control. While this function is ON, the auto iris level
can be adjusted with the iris ring. (A.IRIS LEVEL value displays nearby F number
indicator.)
IRIS Select iris control mode (auto/manual).
Y GET
Turn ON/OFF spot-meter function. While this function is ON, a white box appears at the
center part of the EVF as a measuring point indicator.
FOCUS ASSIST
Turn ON/OFF focus assist (EXPAND, EDGE PEAKING) function.
Type of assist can be selected from MAIN MENU > SW MODE > FOCUS ASSIST MODE
FOCUS MACRO
Turn ON/OFF macro focus mode. Effective range (Wide-end only or All zoom range) can
be selected from MAIN MENU > SW MODE > MACRO MODE
To Next Page
Loading...
