61
2. USER assignable functions (continued)
Item Effect
OIS Turn ON/OFF optical image stabilizer (OIS).
FAST ZOOM
Turn ON/OFF a function increases servo zoom speed. To use this function with handle zoom
button, set a speed control switch to “VAR”.
Note: When this function is turned ON, motor’s operation sound becomes louder, and may
be audible and recorded.
ZEBRA Show/hide ZEBRA indicator and marker.
EVF ON/OFF Turn ON/OFF viewfinder image
PRE REC
Turn ON/OFF the pre-record mode. This mode allows the camera to start recording video
and audio approx. 3 seconds in the HD mode, 7 seconds in the SDTV mode before the
REC/PAUSE button is pressed.
TEXT MEMO Leave TEXT MEMO to clips.
SHOT MARK Leave SHOT MARK to clips.
DEL LAST CLIP Delete the last recorded clip from the microP2 card.
SLOT SEL
Select microP2 card slot to be recorded. It only works when two micro P2cards are mounted
to both slots.
AUDIO MON SEL
While keep pressing the USER button, change audio output (*) channel from CH1/2 to
CH3/4. * From Headphones out, built-in speaker, and HDMI terminal
REC CHECK
Play last 3 seconds of the last recorded clip on the microP2 card. Plays last 10 seconds
when keep press the USER button.
BACKGR REC PAUSE
Pause recording on SLOT2 when background record mode (see P.43) performed, stop
background recording when keep press the USER button for 5 seconds.
USB MODE Turn ON/OFF USB connection mode.
To Next Page
Loading...
