43
BACKGROUND REC and SIMUL REC mode
Following recording modes are available with dual microP2 card slots.
BACKGROUND
Keep recording with one of the two microP2 cards in the card slot1, another card can start and stop recording.
* When press the REC button, recording starts in both slots. After that, recording can start and stop in the slot1.
* To stop recording in the card slot2, assign “BACKGR REC PAUSE” function to any USER assignable buttons and
keep press it for 5 seconds.
SIMUL
Record the same content onto the two microP2 cards simultaneously.
* When remaining record time for the microP2 cards is different, the camera displays shorter one’s remaining time.
* Recording stops when one of the two microP2 cards became full.
Slot1
Slot2
TAKE1 TAKE2 TAKE X
RECORD
TAKE1
TAKE2 TAKE X
TAKE1 TAKE2 TAKE X
Slot1
Slot2
To Next Page
Loading...
