37
SCENE FILE menu (continued)
Menu item Description Setting (factory default)
GAMMA MODE SEL Select gamma curve. See P.18 for the details.
HD / SD / FILMLIKE1 /
FILMLIKE2 / FILMLIKE3 /
FILM-REC / VIDEO-REC
GAMMA
SETTING
MASTER GAMMA
Adjust shape of the master gamma curve (in
0.01 steps)
0.30 – 0.45 – 0.75
F-REC DYNAMIC LVL
Set dynamic range. (Available with FILM-REC
gamma curve)
200% / 300% / 400%
/ 500% / 600%
F-REC BLACK STR LVL
Adjust gamma characteristic in darker signal
areas. (Available with FILM-REC gamma
curve)
0% - 30%
V-REC KNEE SLOPE
Adjust knee slope angle. (Available with
VIDEO-REC gamma curve)
150% / 200% - 500%
V-REC KNEE POINT
Adjust knee point level. (Available with
VIDEO-REC gamma curve)
30% - 107%
BLACK GAMMA
Adjust general gamma characteristic in darker
areas.
-8 – OFF – 8
B GAMMA RANGE
Set the upper limit of compression / expansion
level of the BLACK GAMMA control.
1: 20% / 2: 30% / 3: 40%
KNEE
SETTING
KNEE MODE
Set operation mode of knee function
(compress bright areas to avoid an
overexposure image.)
AUTO / MANUAL / OFF
A KNEE RESPONSE
Set response speed of automatic knee control.
Its speed becomes faster when decrease the
value.
1 – 4 – 8
KNEE MASTER POINT
Adjust master knee point level in MANUAL
knee mode. (in 0.5% steps)
70.0% - 93.0% - 107.0%
KNEE MASTER SLOPE
Adjust master knee slope angle in MANUAL
knee mode.
0 – 85 – 99
KNEE MASTER SLOPE
Rch
Adjust master knee slope angle of Rch in
MANUAL knee mode.
-31 – 0 – 31
KNEE MASTER SLOPE
Bch
Adjust master knee slope angle of Bch in
MANUAL knee mode.
-31 – 0 – 31
HI-COLOR SW
Turn ON/OFF color dynamic range expansion
mode.
ON / OFF
HI-COLOR LVL Adjust color dynamic range level. 1 – 32
WHITE CLIP
SETTING
WHITE CLIP Turn ON/OFF white clip function. ON / OFF
WHITE CLIP LVL Adjust clipping level of bright part. 90% - 109%
Rch CLIP LVL Adjust clipping level of bright part of Rch. -31 – 0 – 31
Bch CLIP LVL Adjust clipping level of bright part of Bch. -31 – 0 – 31
DRS
Turn ON/OFF Dynamic Range Stretcher
(DRS) function.
ON / OFF
DRS EFFECT DEPTH
Set effect level of DRS.
Note: Better result of DRS can be expected when
higher number is chosen. However, noise level will
also become higher.
1 / 2 / 3
A.IRIS LEVEL Turn ON/OFF automatic aperture level control.
ON / OFF
A.IRIS LEVEL EFFECT
Set the target brightness level in auto iris
mode.
-50 – 0 – 50
To Next Page
Loading...
