40
SW MODE menu (continued)
Menu item Description Setting (factory default)
AREA MODE Set a function to be recalled with the control
stick.
INHIBIT: No function assigned
FOCUS: Assign Autofocus and focus bar
IRIS: Assign auto iris
Y GET: Assign spot meter
FOCUS/IRIS: Assign both FOCUS and IRIS
FOCUS/Y GET: Assign both FOCUS and YGET
WFM MODE
Set waveform display type to be displayed
on the built-in LCD monitor.
WAVE , VECTOR , WAVE/VECTOR
ZEBRA Turn ON/OFF ZEBRA pattern display ON / OFF
ZEBRA MODE Set display time of ZEBRA CONTINUE / MOMENT (5 sec.)
BARS TYPE
Select color bars type
SMPTE
FULL BARS
SPLIT
ARIB
FRONT REC
Enable/disable the REC button located at
front side of the unit.
INHIBIT / ACTIVE
Control stick
To Next Page
Loading...
