62 (E)
CONTENTS
Audio V fade function
When editing tapes, the edit point splicing selection
(setup menu No. 311 and 312) information is recorded
on the tape. This information is then sensed during
playback, and V fade or cut processing is
automatically performed for these sections.
However, only when the playback fade selection (No.
727) is AUTO.
<Notes>
O When the playback fade selection (No. 727) is
CUT, cut processing is performed for all splices.
O When the playback fade selection (No. 727) is
FADE, V fade processing is performed for all
splices.
When the edit point splicing selection (setup
menu No. 311 and 312) is CUT
Audio signal A
Noise appears at the edit splice.
Audio signal B
When the edit point splicing selection (setup
menu No. 311 and 312) is FADE
Audio signal A
V fade is performed instantaneously to
eliminate the noise.
Audio signal B
To Next Page
Loading...
