Panasonic AK-HC910 - Setting Menu: Electronic Shutter; Setting Menu: Horizontal Phase Adjustment

28
Setting of Menu Items

SHUTTER

SHUTTER MODE :OFF
SHUTTER SPEED :1/100
SYNCHRO SCAN :75.1


°° °°
H.PHASE

H.PHASE-COARSE :09
H.PHASE-FINE :40

°° °°
@ Setting menu
3 Horizontal phase adjustment menu
for external reference signal
H.PHASE-COARSE: It is able to set the
horizontal phase in 15µ step.
H.PHASE-FINE: Setting of 1-step fine
adjustment in the above phase
adjustment.
2 Electronic shutter setting menu
SHUTTER MODE: It selects the shutter
operation. ON/SYNCHRO/OFF can be
selected.
ON  Setting of normal discrete shutter
speed.
SYNCHRO  Setting of synchro scan
mode.
SHUTTER SPEED: Setting of normal
shutter speed.
SYNCHRO SCAN: Setting of synchro
scan mode.
Shutter speeds of 60 Hz to 120 Hz can
be continuously changed.

MODE


BLACK STRETCH :OFF
D5600K :OFF
CABLE COMPE :0m
SUP GAIN :OFF
CAM ID :BAR
CAM ID POSI :0
MATRIX TABLE :OFF
COLOR CORRECTION :OFF
STATUS :ON

°° °°
1 Camera mode setting menu
(continued from previous page)
CAM ID POSI: It sets the display
position of camera ID.
0: top left, 1: top right, 2: down left,
3: down right.
MATRIX TABLE: It sets A, B or OFF of
Matrix table.
COLOR CORRECTION: Setting of
matrix ON/OFF.
STATUS: It sets displaying/not
displaying the status when AWB/ABB is
executed.