Panasonic Aquarea WH-ADC1216H6E5C - Enamelled Domestic Hot Water Tanks

75
Aquarea air-to-water heat pumps - Planning and installation manual - 02/2022
Product Description
4
4.8.1.2 Enamelled domestic hot water tanks
With their generously dimensioned heating surfaces for increased heat transfer, the enamelled hot
water tanks are optimally suited for combination with Aquarea heat pumps. They are all equipped
with a sacricial anode for improved protection against corrosion and reach a maximum supply
water temperature of 95 °C.
PAW-TA15C1E5STD / PAW-TA20C1E5STD / PAW-TA30C1E5STD /
PAW-TA40C1E5STD
With their generously dimensioned heating sur-
faces for increased heat transfer, the enamelled
hot water tanks are optimally suited for combi-
nation with Aquarea heat pumps.
PAW-TA15C1E5STD has a capacity of 150 lit-
res, no electric tank heater and is suitable for
oor-standing or wall-mounted installation.
The other three tanks have capacities of 200,
300 and 400 litres respectively, an electric tank
heater with ange connection in the lower tank
area, and they can only be installed standing in
vertical position.
PAW‑TA15C1E5STD PAW‑TA20C1E5STD
PAW‑TA30C1E5STD
PAW‑TA40C1E5STD
Components
3
2
1
5
6
7
8
9
4
A B
A Internal view (seen from front side) for oor-standing
installation
1 Water piping connections on top side
2 Immersion tube for control
 3 Sacricialmagnesiumanode
4 Heat insulation
5 Hot water tank
6 Heat exchanger coil
7 Floor
B External view (seen from left side) for wall‑mounted
installation
4 Heat insulation
8 Wall
9 Water piping connections on bottom side
PAW‑TA15C1E5STD