46
BL-C111A /BL-C131A
9.2.3. How To Remove Sub Board
• 1-4 are the same as How To Remove RF Board.
• 5-7 are the same as How To Remove Main Board and I/O Board.
9. Remove Angle, Screw (H) and Board Support Rubber from I/O Board .
8. Remove two Screws (F).
9. Remove Antenna from Cabinet Body.
10. Remove six Screws (F).
11. Remove Eye Block, Pan Motor Unit, Pan Motor Angle, Connect
Angle and Washer.
To Next Page
Loading...
