11
q INITIAL VALUES OF MAIN MENU
Item Data/Variable range Initial setting value
16/9 4/3 13/9 14/9
OFF MODE2 MODE1
16/9 4/3 13/9 14/9
OFF MODE2 MODE1
q INITIAL VALUES OF FRONT PANEL CONTROL
Item Data/Variable range Initial setting value
POWER ON/OFF OFF
INPUT SELECT INPUT A — F INPUT A
COLOR OFF
AREA MARKER
PULSE CROSS
ASPECT ON/OFF OFF
UNDER SCAN
SCREENS CHECK
DEGAUSS
VOLUME 00 — 50 10
CONTRAST
BRIGHT POTENTIOMETER Center click position
CHROMA
PHASE
HIGH LOW OFF
APERTURE CONTROL
LEVEL 00 — 10 00
CONTROL FREQ. HIGH
SLOT CONDITION Type of boards installed in the rear panel slots.
INPUT A — F SLOT1 : INPUT A, B
SLOT2 : INPUT C, D
SLOT3 : INPUT E, F
sub menu POSI. LOWER / UPPER LOWER
AREA MARKER OFF
AREA MARKER-R OFF
CENTER MARKER ON / OFF OFF
COLOR MATRIX SELECT : MANUAL / ITU601 MANUAL
[Example when MANUAL is set]
R-Y PHASE : 90/92/94/112 90
R/B GAIN : 0.56/0.68/0.79/0.86 0.86
G-Y PHASE : 236/240/244/253 244
G/B GAIN : 0.30/0.34/0.40/0.45 0.30
To Next Page
Loading...
