Panasonic BT-H1700P

10
FACTORY SETTINGS
q INITIAL VALUES OF THE SET-UP MENU ITEMS
Item Data/Variable range Initial setting value Remarks
FUNCTION SETTING
COLOR SYSTEM AUTO/NTSC/PAL AUTO Apply the NTSC/PAL color bar signal
RUSH DELAY TIME STD. /SLOW STD.
PICTURE SUB ADJ.
CONTRAST -20 — +20 00
BRIGHT -20 — +20 00
CHROMA -20 — +20 00
PHASE -20 — +20 00
COMPO. LEVEL SMPTE/B00/B75 SMPTE Apply the component signal
NTSC SETUP 00 / 7.5 7.5
COLOR TEMP. / BAL.
COLOR TEMP. LOW / HIGH LOW
BLUE DRIVE MIN — MAX (127 steps) 000
RED DRIVE MIN — MAX (127 steps) 000
GREEN CUTOFF MIN — MAX (205 steps) 000
BLUE CUTOFF MIN — MAX (205 steps) MIN
RED CUTOFF MIN — MAX (205 steps) 000
SIZE / POSI. ADJ.
H.SIZE -20 — +20 00
H.POSITION -20 — +20 00
V.SIZE -20 — +20 00
V.POSITION -20 — +20 00
DISTORTION ADJ.
PINCUSHION -20 — +20 00
PIN.BALANCE -20 — +20 00
PARALLELOGRAM -20 — +20 00
TRAPEZOID -20 — +20 00
STATUS DISPLAY
STATUS DISPLAY ON / OFF ON
1080/1035 1035/1080 1080 Apply the component signal
CONTROL LOCK ON / OFF OFF