15
1. DC voltmeter ( or digital voltmeter)
2. Oscilloscope
3. Color analyzer (color temperature meter)
4. High-voltage voltmeter
5. Signal generator (Should be compatible with the following signal
specifications.)
6. Scale (made of non-metallic material)
7. BT-YA701P (NTSC/PAL Video Input Card)
8. BT-YA702P (Component/RGB Input Card)
L FOCUSING AND SCREEN ADJUSTMENT HOLES
The rear panel has the adjustment holes for use in adjusting the
focusing and screen.
[CAUTION]
Be sure to use screwdrivers made of non-metallic materials for
the following adjustments. If a metallic screwdriver is used, short-
circuiting may damage parts of the unit, including the high-volt-
age parts.
Fromats of Signal Used in Adjustments
Types of Signals Used in Adjustments
s DTV format component signals
(480/60i, 480/60p, 576/50i, 720/60p, 1080/24pSF, 1080/60i)
s NTSC signals
(Composite, Y/C)
s PAL signals
(Composite, Y/C)
s Color bar signal
s Size adjustment signal
s All white signal
s All black signal
s Mono-scope signal
s Gray scale signal
s 10-step gray scale signal
s Crosshatch signal
s Crosshatch signal with circle pattern
MEASURING INSTRUMENTS AND TOOLS
To Next Page
Loading...
