Panasonic CDC NS700 - To Set Forward; Set up call forwarding for the main incoming group.; To Cancel Call Forward.; Cancel call forwarding for the main incoming group.

Voice Solutions | Data Solutions | Mobile
Oakport
,
Boyle, Co Roscommon
T: 071-9667555
E:
info@cdctelecom.ie
W:
www.cdctelecom.ie
To Set Forward
• Lift Handset
• Dial * 7141
• Dial “Group Number”, (default Main Incoming Group is usually 603)
• Dial “9” + desired phone number
• Dial #
• Receive Confirmation Tone
• Replace handset.
To Cancel Call Forward.
• Lift Handset
• Dial * 7140
• Dial “Group Number”, (default Main Incoming Group is usually 603)
• Dial #
• Receive Confirmation Tone
• Replace handset
Opening & setup of Mailbox for first time
Note! : Please read through all the instructions below before doing any of the
steps.
• Dial 500 (or the “Message” button)
• Press 0000 or 1234 (this is the default password) and then #
• The system will then say: "You have zero new messages"
• Depending on your system, Press 4 (NS700) OR Press 3 (TVM50) for "Mailbox
Management"
• You must now change your password
Security Alert! DO NOT use 1234, 8888, 1111 or anything else that’s easy!
*please see page 142 0f User_Manual_Full *
• Press 2, then 1 and enter your new password xxxx (4 digits) and #
• Press 2 to accept or follow the prompts to change again
Note: The next step requires you to record your name for the company
directory. Your personal greeting will be recorded at Step 11