22
Multimedia Pocket
3 Carefully insert the device into the multimedia pocket by push-
ing both corners until it surely fits in the slot.
z The computer must be on when inserting the device.
z Insert the device with the label side up.
CAUTION
z Hold the device by its both sides. Otherwise the device may be damaged.
z When raising the slot side upward and inserting the device, be careful not to apply any
impact to the device.
z When you carry the computer, confirm that the release button is surely locked so that
the device does not fall.
z Be sure to insert the device into the multimedia pocket for use.
NOTE
z You can see that the device is recognized or not by clicking and then double-clicking
*2
. If the device is not rec-
ognized (or if the media cannot be accessed), turn off the computer and reinsert the device.
*2
Windows XP: by double-clicking on the notification area
To Next Page
Loading...
