63
Modem
The computer automatically resumes from sleep
*2
when the telephone connected to the modem rings.
You will need software to keep the computer in idle state waiting for a phone call, and if you prefer, to turn the computer to
sleep
*2
again afterward. For further information, refer to the instruction manual of the software application.
To enable this function
1 Click (Start) - [All Programs] - [Windows Fax and Scan].
2 Click [Tools] - [Fax Settings].
z A standard user needs to enter an administrator password.
z Check whether the modem you are using is displayed in Device name. If not, click [Select fax device] and select
the correct modem.
3 Add a check mark for [Allow the device to receive fax calls] and click [OK].
4 Click (Start) - [Computer] - [System properties] - [Device Manager].
z A standard user needs to enter an administrator password.
5 Double-click [Modems], and then double-click the internal modem.
6 Click [Power Management] and add a check mark for [Allow this device to wake the com-
puter], and then click [OK].
1 Click [start] - [Control Panel] - [Performance and Maintenance] - [System] - [Hardware] -
[Device Manager].
2 Double-click [Modems], and then double-click the internal modem.
3 Click [Power Management], add the check mark for [Allow this device to bring the com-
puter out of standby], and click [OK].
Ring Resume Function
To Next Page
Loading...
