62
Modem
CAUTION
z Use a surge protector since the modem may be damaged by a sudden high voltage surge that may occur in the event
of a lightning strike.
1 Open the cover (A), and connect the computer and the
telephone jack (B) using the telephone cable (C).
z Hold the cable so that the shape of the connector (D) matches the
port, and insert fully until it clicks.
2
Click (Start) - [Control Panel] - [Connect to the Inter-
net] - [Dial-up].
Click [start] - [Control Panel] - [Printers and Other Hardware] - [Phone and Modem
Options].
3 Change the settings as necessary.
NOTE
z Do not enter sleep
*1
or hibernation during communications.
z To remove the cable, press and hold the lever and pull out.
*1
Windows XP: standby
Connecting the Internal Modem with a Telephone Jack
A
To Next Page
Loading...
