21
Getting Started
CAUTION
l
Wait until the drive indicator
has turned off.
l
You can change the user name, password, image and security
setting after setup of Windows.
l
Remember your password. If you forget the password, you can-
not use the Windows.
Creating a password reset disk beforehand is recommended.
l
Do not use the following words and characters for user name:
CON, PRN, AUX, CLOCK$, NUL, COM1 to COM9, LPT1 to
LPT9, @, &, space. In particular, if you create a user name (ac-
count name) that includes the “@” mark, a password will be re-
quested at the log-on screen, even if no password has been set.
If you try to log on without entering a password, “The user name
or password is incorrect.” may be displayed and you will not be
able to sign in / log on to Windows (
è
page 41).
l
Use standard characters as a computer name: numbers 0
through 9, uppercase and lowercase letters from A to Z, and the
hyphen (-) character. If the error message “The computer name
is not valid” appears, check if characters other than the above
are not entered. If the error message still remains on the display,
set the key entry mode to English (“EN”) and enter characters.
7
Set the time zone, and then set the date and
time.
A
Open the Control Panel.
1. Click
on the Start screen.
2. Click [Control Panel] under “Windows System”.
B
Click [Clock, Language, and Region] - [Date and Time].
C
Click [Change time zone…].
D
Select the time zone, then click [OK].
E
Click [Change date and time…], then set the date and time.
8 Create the recovery disc.
If the recovery partition of the ash memory drive is damaged,
for example, you can use a recovery disc to reinstall the OS
and restore its factory default condition. We recommend creat-
ing a recovery disc before you begin using the computer.
Refer to
è
Reference Manual “Recovery Disc Creation Util-
ity” about creating the disc.
CF-AX3mk2_EU_M.indb 21 2013/11/18 12:12:54
To Next Page
Loading...
Need help?
General