Panasonic CF-AX3 Series

20
Getting Started
First-time Operation
5 Select language.
Select language and OS
(32-bit or 64-bit).
CAUTION
l
Carefully choose your language because you cannot change it
later. If you set a wrong language, you need to reinstall Windows.
A
Select language and click [Next].
Follow the on-screen instructions.
A
Select language and OS (32bit or 64bit) on “Select OS”
screen and click [OK].
The language setting will start by clicking [OK] on the conr-
mation screen.
You can return to the “Select OS” screen by clicking [Cancel].
The language and OS setting will be completed in about 15
minutes.
B
When termination screen is displayed, click [OK] to turn off
the computer.
C
Turn on the computer.
6 Setup Windows.
Follow the on-screen instructions.
l
The computer restarts several times. Do not touch the key-
board or touch pad, and wait until the drive indicator has
turned off.
l
After the computer is turned on, the screen remains black or
unchanged for a while, but this is not a malfunction. Wait for
a moment until the Windows setup screen appears.
l
During setup of Windows, use the touch pad and clicking to
move the cursor and to click an item.
l
Setup of Windows will take approximately 5 /
20 minutes.
Go to the next step, conrming each message on the display.
l
Follow the steps below.

A
When “Enable sensors” is displayed, click [Enable this
sensor].

B
When the [User Account Control] screen is displayed, click
[Yes].

C
At the [Display Rotation Tool] conrmation screen, click [Yes].
The computer restarts automatically, and the setting is
enabled.
l
You can set the Wireless Network after the setup of Windows
is complete.
If “Get online” is displayed, select “Skip this
step”.
“Join a wireless network” screen may not appear.
CF-AX3mk2_EU_M.indb 20 2013/11/18 12:12:54