82
Wireless LAN
<Only for model with wireless LAN>
CAUTION
z Do not use wireless LAN on airplanes, in hospitals, or in other locations where wireless LAN signals may
affect devices.
Follow the instructions of airline companies and hospitals. If you use the computer in these locations, turn off the wire-
less LAN.
z To avoid unauthorized access to the computer through wireless LAN
We recommend you to make security settings such as encryption before using wireless LAN. Otherwise the flash
memory data such as the shared files can be exposed to the risk of unauthorized access.
NOTE
z Communication is established through the wireless LAN antenna (A). Do not block
the antenna area with your hand or body.
z You cannot use the wireless LAN function together with the Fast User Switching
function.
z The transmission rate will be lower when a microwave oven is used near by.
z To use wireless LAN, set [Wireless LAN] to [Enabled] (default) in the [Advanced] -
[Wireless Configuration] menu of the Setup Utility (Î page 90).
Before using a wireless LAN, turn the wireless LAN communication on.
Turning on/off the wireless LAN communication
1 Slide the wireless switch to turn on/off wireless LAN. (Î page 79)
z When turning on wireless LAN
If you cannot turn on wireless LAN using the wireless switch, confirm the Wireless Switch Utility setting (Î page
80), If you cannot turn on wireless LAN in the Wireless Switch Utility, try the following procedure.
Using the Wireless LAN Function
A
To Next Page
Loading...
Need help?
General