Panasonic CM202-DH - Check Every 3000 Hours (Once Six Months)

Page 1-74
1-6 Check Every 3000 Hours (Once Six Months)
1-6-1 Exchanging the Board Transfer Belt and Roller
The board transfer belt and board transfer roller on the board conveyor must be exchanged regu-
larly.
∗ For DU/DHU specifications, it is necessary to remove the feeder base cover for the maintenance.
“1-2-3 Setting and Removing the Feeder Base Cover (Only for DU/DHU Specifications)”
1. Removing the board transfer belt
∗ You may store the removed belt as an spare. If you do not store it, cut it off with a nipper.
1. Turn OFF the power.
2. Remove the belt by pulling it out.
444C-E-MMA01-A09-04
Tools Allen wrench and push-pull gauge Required time 15 minutes
R
E
L
E
A
S
E
T
R
I
P
O
F
F
O
N
R
E
S
E
T
3Y3C-081P