Note:
¡ You cannot save any SQ
presetting value in
[1]
button.
¡ Any SQ adjustments will
not change the call up
screen names such as
ROCK and JAZZ.
q
Press
[
[
]
or
[
]
]
to select a frequency
band (Low, Mid, High).
[
[
]
: Higher frequency band
[
]
]
: Lower frequency band
Turn
[VOLUME]
to select a frequency.
q: Higher frequency
w: Lower frequency
w
Press
[
}
]
or
[
{
]
to adjust the level.
[}]: Up
[{]: Down
e Press and hold one of the preset buttons
from [2] to [6] for more than 2 seconds.
¡The adjusted SQ is preset in the number
of the selected button, and return to the
regular mode resumes.
¡When you suspend the SQ preset adjust-
ment, each level remains your recent
adjustment until a new SQ presetting
operation is performed or you call up the
SQ preset.
Level
The selected frequency
band blinks.
Frequency
Note:
¡ The sequence and contents of setting items may depend on the conditions of devices to be connected. For further
information, refer to the
System Upgrade Guidebook or the instruction manuals for the devices to be connected.
¡ To return to the regular mode, press [D] (DISP).
¡ If no operation takes place for more than 5 seconds (10 seconds in the SQ adjustment) in audio setting, the dis-
play returns to the regular mode.
¡ Please refer to page 9 for calling up a preset SQ.
¡ Adjustments of the subwoofer level and low pass filter are effective when the subwoofer is connected.
CQ-C5403W
To Next Page
Loading...
