8
7
E
N
G
L
I
S
H
CQ-C5403W/C5303W
General
[SQ] (Sound Quality)
[D] (DISP) (Display)
[MUTE] (Mute/attenuation)
[SRC/PWR] (Source/Power)
Remote control sensor (
a Page 6)
[VOLUME]
Spectrum analyzer (a Page 24)
SQ3 indicator
Power
Set your car's ignition switch to the ACC or ON position.
ON : Press [SRC/PWR].
OFF : Press and hold [SRC/PWR] until you hear a
beep (approximately 1 second), then release it.
Note:
¡ When the ignition switch is set to ON, the face plate is
tilted to secure their former positions.
¡ If you turn the key to the ACC OFF position during the
security function is active, the security message
appears with a warning alarm. (Default: SLED ON)
(
a Page 26 about Security Function setting)
Volume
Note:
¡ The volume level can be set independently for each
source. (For radio, one volume setting for AM, one vol-
ume setting for all FMs)
Mute/Attenuation
ON : Press [MUTE].
OFF : Press [MUTE] again.
You can select mute or attenuation. (
a Page 24)
indicator
To Next Page
Loading...
