Panasonic CQ-DVR592U

MP3CDVideo CDDVD Video
DVD Video
Video CD
DVD Video
Video CDDVD Video
42 43
User settings (continued)
E
N
G
L
I
S
H
28
CQ-DVR592U CQ-DVR592U
E
N
G
L
I
S
H
27
(Example: 1. 1)
≥ To apply changes to settings, be
sure to press [0].
≥ After the initial settings have been
changed and entered, the player
returns to the start of the disc and
begins playback.
1. Menu Language : English
2. Subtitle Language : English
3. Audio Language : English
4. TV Aspect : 16:9
5. TV Mode (4:3) : Pan&Scan
6. On-Screen Messages : ON
7. Audio Output Level : 3
8. D. Range Compression: OFF
<Main Menu>
0: Exit
<Audio Output Level>
Select
Audio Output
Level
1. 1
2. 2
3. 3
4. Return
Select each item.Select each setting menu.
(While disc stopped)
Display
the Main Menu.
32
TITLE
MENU
1
1. Minimum: Most compressed mode like TV
broadcasts, etc.
2. Standard: Mode recommended by
software creators for
listening at low volumes.
3. OFF: Does not compress the dynamic
range.
4. Return: The display returns to “Main Menu”.
1
2
3
4
Finish the Setting.
4
1
2
3
4 5 6
7 8
1. Menu Language : English
2. Subtitle Language : English
3. Audio Language : English
4. TV Aspect : 16:9
5. TV Mode (4:3) : Pan&Scan
6. On-Screen Messages : ON
7. Audio Output Level : 3
8. D. Range Compression: OFF
<Main Menu>
0: Exit
S
≥
MODE
0
≥ When “Minimum” or “Standard” is
selected, lights on the display.
≥ When it is difficult to hear
comparatively quiet sounds (such as
movie dialogue), setting “Minimum”
will make those sounds easier to hear.
(Example: 7. Audio Output Level)
1. Pan&Scan: Plays in Pan & Scan mode
2. Letterbox: Plays in Letter Box mode
3. Return: The display returns to “Main Menu”.
≥ If “Pan & Scan” or “Letterbox” is
already set in the software, this
setting is ignored.
5. TV Mode
Set this when playing wide-screen video on a conventional-size
(4:3) monitor.
[Default: Pan & Scan]
1. ON: On-Screen Display messages such as “Play” and “Pause” will always be displayed
on the screen for 5 seconds.
2. OFF: On-Screen Display messages such as “Play” and “Pause” will not be displayed .
3. Return: The display returns to “Main Menu”.
6. On-Screen Messages
This is to select On-Screen Display (➡ page 33) messages which
will be displayed when On-Screen Display is turned off by pressing
[OSD].
[Default: ON]
8. Dynamic Range Compression
By compressing the range of the playback level (the dynamic
range), it is possible to maintain the impact of audio even at low
volumes.
This function only works with Dolby Digital encoded material.
[Default: OFF]
1. 1: Minimum Level
2. 2: Middle level
3. 3: Maximum level
4. Return: The display returns to “Main Menu”.
≥ We recommend that you select the initial
setting when you use this player in the
system configurations (➡ page 68), and
adjust the volume control on the display
unit connected to this unit. See the display
unit operating manual for details.
7. Audio Output Level
Adjust the level at which the audio signals are to be output in the
PRIVATE MODE (➡ page 36).
[Default: 3]
SOURCE
RETURN TITLE
TRACK
CAR DVD PLAYER/RECEIVER
TITLE / CHAPTER
PWR
RET
SEL
MUTE
VOL
OSD GRP
STOP
TRACK / SEARCH
PAUSE PLAY
BAND
E
N
T
E
R
MENU
0
9
SUBTITLE AUDIO ANGLE
RANDOM
P
≥
MODE
SCAN REPEAT
123
456
78
S
≥
MODE
1
4
2
3
DRC
≥ The setting is completed.