Panasonic CQ-R145U - Clock Basics; Initial Time; Clock Display

IM
I
Clock Basics
Initial Time
© Press [CLK]. “AdJ” appears on the
display.
(D Press and hold [CLK] again for more
than 2 seconds. ‘‘12” blinks, and the
time setting mode is activated.
(D Press [A] or [VI to set hours.
@ Press [CLK] again for minute setting.
© Press [A] or [V] to set minutes.
Hold [Al or [V] to change numbers
rapidly.
© When you have set the time, press
[CLK].
Time Reset
Press and hold [CLK] for more than 2 seconds to activate the time
setting mode. Then, repeat step © to © above.
Clock Display
Press [CLK] forelock display.
Press [CLK] again, the current audio display mode resumes.
16
CQ-R145U