Panasonic CQ-R145U - Specifications.25

Specifications
GENERAL
-
Power Supply
12 V DC (11 V -16 V) Test Voltage 14.4 V, Negative ground
Maximum Power Output
30 W x 4 channels at 400 Hz, Volume Control maximum
Power Output
15 W per channel into 4 H, 40 to 30,000 Hz at 3 % THD.
Tone Action
Bass ; ± 1 2 dB at 100 Hz
Treble; ± 12 dB at 10 kHz
Current Consumption
Less than 2.5 A (tape mode, 0.5 W 4-speaker)
Pre-Amp Output Voltage
2.0V (CD Play mode; 1kHz 0 dB)
Speaker Impedance
4 Cl (4 - 8 Q acceptable)
Dimensions (W x H x D)
T x 1 -15/16" x 5-7/8" {178 x 50 x 150 mm)
Weight
3 lbs. 8 oz. (1.6 kg)
AM RADIO
Frequency Range
530- 1,710 kHz
Useable Sensitivity
28 dB/pV (25 pW S/N 20 dB)
| FM STEREO RADIO
Frequency Range
87.9- 107.9 MHz
Useable Sensitivity
12 dBf. (1.1 pV/ 75 a, S/N 30 dB)
50 dB Quieting Sensitivity
17 dBf. (1.8 pV/75 a)
Frequency Response
30- 15,000 Hz ±3 dB
Alternate Channel Selectivity
75 dB
Stereo Separation
35 dB at 1,000 Hz
Signal/Noise Ratio
70 dB (Mono)
TAPE PLAYER
Reproduction System
4-track, 2-program stereo
Tape Speed
1-7/8“/sec (4.76 cm/sec)
FF/REW Time
Less than 200 sec (C-60)
Frequency Response
35- 14,000 Hz ±3 dB
Wow and Flutter
0.12 % (WRMS)
Signal/Noise Ratio
52 dB
•Above specifications comply with EIA standards.
Note:
Specifications and design are subject to modification without notice due to improvements in technology.
PSIft 15 Of th© FCC Rules (This standard is for U.S.A Only)
This unit has been manufactured under the part 15 of the FCC Rules.
Do not attempt to make any changes or modifications to this unit.
CO-R145U
25