21
CQ-RXBT490W/CR-LXBT490W
For use with iPod
Operation Flow
1
Connect with iPod.
2
Press [SOURCE] to select the iPod (USB)
mode. Playback starts.
Note: If playback does not start, press [BAND] (
5
/h
).
File Selection
[7]: Next fi le
[6]: Beginning of the current fi le
For the preceding fi le, press twice.
Notes:
¡ Hold down for fast forward/reverse.
¡ When fast forward comes to the end of a fi le or fast
reverse comes to the beginning of a fi le, regular
playback starts when the fast forward or reverse
button is released.
Pause
Press [BAND] (
5
/h).
Press again to cancel.
Playing Mode Selection
1
Press [ ] to activate the Playing Mode
Selection mode.
2
Turn [VOL] clockwise or counterclockwise to
adjust.
PLAYLIST: Playback by playlist (Default)
ARTIST: Playback by artist
ALBUM: Playback by album
GENRE: Playback by genre
3
Press [VOL] (PUSH SEL) to determine the
selection.
4
Turn [VOL] clockwise or counterclockwise to
select a portion to be played.
5
Press [VOL] (PUSH SEL) to determine the
selection.
Notes:
¡ To return to the previous screen, press [DISP].
¡ Files without an album name or an artist name are
not playable in the playing mode of the album or
artist display respectively.
¡ When using with iPod 5th generation, please note
the selected fi le from this unit may differ from your
iPod device. If such phenomenon occurs, please
select the desired fi le from your iPod directly.
¡Playing Mode Selection is not available when this
unit is switch to iPod control mode.
USB (Universal Serial
Bus) Connector (in-
side of the cover)
[3] (SCROLL)
scrolls the information on the display.
[4][iPod]
toggles iPod control mode between head
unit and iPod.
[5] (RANDOM)/[6] (REPEAT)
toggles on/off each play mode.
[SOURCE]
selects a source.
[DISP] (Display)
switches the in-
formation on the
display.
[BAND] (
5
/h
) (Play/Pause)
toggles between pause and play
with the iPod source.
[6] [7]
skip to the previous/next fi le in the player mode.
For fast reverse/fast forward, hold down either of them.
By connecting compatible with iPod devices to USB connector via a USB extension cable for iPod (USB 2.0, not
included), you can enjoy music fi les stored on the compatible with iPod devices in your vehicle.
Note: Refer to the section on “USB (MP3/WMA)” for connection.
[VOL]
selects a value in the Playing Mode
Selection mode.
(PUSH SEL :Select)
selects items in the Playing Mode
Selection mode.
[
]
activates the Playing Mode
Selection mode.
toggles between pause and play