28
CQ-RXBT490W/CR-LXBT490W
Bluetooth
®
- Hands-Free Phone
Basic operation
If a call comes in to the mobile phone when it is con-
nected to this unit, the unit automatically switches
to the Bluetooth
®
Hand-free and the ring tone for the
incoming call is output from the speakers.
Answering an incoming call:
Press [PHONE] during a call incoming.
The Bluetooth
®
indicator ( ) blinks during a call.
Note: If the automatic answering function on this unit
is set to ON, conversation can be automatically started
after receiving a call.
To end a call:
Press [PHONE] during a call.
Rejecting an incoming call:
Hold down [PHONE] for more than 2 seconds to
reject an incoming call.
Setting of automatic answering function
1
Press [MENU] .
2
Turn [VOL] clockwise or counterclockwise to
select menu “PHONE ”.
3
Press [VOL] (PUSH SEL).
4
Turn [VOL] clockwise or counterclockwise to
select “AUTO-ANS”.
5
Press [VOL] (PUSH SEL).
6
Press [VOL] (PUSH SEL), and then turn [VOL]
to select set ON or OFF
Automatic answer-
ing deactivated
(Default)
Automatic answering
activated
Note: Once rotary operation is made, the setting is
activated.
When automatic answer is set to ON, this unit answers
an incoming call automatically.
[VOL]
selects a menu.
(PUSH SEL :Select)
selects items in the selection mode.
[MENU]
selects items in the
phone menu.
[PHONE]
picks up the phone, makes a call, or
rejects the call.
[BAND]
switches between the private
mode and hands-free mode.
To Next Page
Loading...
