Panasonic CQ-RXBT490W - Disc Player; Disc Handling and Playback

14
CQ-RXBT490W/CR-LXBT490W
Disc Player (only for CQ-RXBT490W)
Operation Flow
When a disc is already loaded, press [SOURCE]
to select the Disc player mode.
1
Press [OPEN] to open the face plate.
2
Load a disc with the printed side facing up.
Printed side up
[u] (Eject)
3
Close the face plate manually.
Notes:
¡
The unit recognizes the disc and starts playing
automatically.
¡ The power will be turned on automatically when a
disc is loaded.
Disc Eject
1. Press [OPEN].
2. Press [u] and take the disc out.
3. Close the face plate manually.
4
Select a desired portion.
Track/File Selection
Press [6] / [7].
Note: To perform fast reverse/forward, hold down
either of them.
Disc Player (CD-DA disc):
Previous/next track
Disc Player (MP3/WMA disc):
Previous/next fi le
Folder Selection (MP3/WMA)
[}] (FOLDER): Next folder
[{] (FOLDER): Preceding folder
Pause
Press [BAND] (
5
/h).
Press again to cancel.
[5] (RANDOM)/[6] (REPEAT)
toggles on/off each play mode.
[3] (SCROLL)
scrolls the information on the display.
[{] [}] (FOLDER)
skip to the previous/next folder.
[OPEN]
opens the face plate
[SOURCE]
selects a source.
[DISP] (Display)
switches the information on the display.
[BAND] (
5
/h
) (Play/Pause)
toggles between pause and play with
the player source.
[6] [7]
skip to the previous/next track/fi le in the player mode.
For fast reverse/fast forward, hold down either of them.
skip to the previous/next folder.
opens the face plate
toggles between pause and play with
the player source.
Caution
¡ A disc which has both CD-DA data and MP3/WMA data on it may not be reproduced normally.
¡ Do not insert a disc when the
indicator lights.
¡ Refer to the sections of “Notes on Discs” (a page 35) and “Notes on MP3/WMA” (a page 36).
¡ This unit does not support 8 cm discs.
¡ Do not insert foreign objects into the disc slot.
(Display)
switches the information on the display.