29
CQ-RXBT490W/CR-LXBT490W
Bluetooth
®
- Hands-Free Phone
Use of voice dial
1
Hold down [PHONE] for more than 2 sec-
onds.
2
Say the voice tag stored on the mobile
phone.
If the voice tag matches with a piece of data on the
phone book registered with the mobile phone, the
telephone number of the name is dialed.
Note: The Bluetooth
®
mobile phone itself must be
equipped with and support the voice dial function.
Switching between the private mode*
and hands-free mode
Press [BAND] during a call.
The private mode and hands-free mode switch alter-
nately every time [BAND] is pressed.
(Private mode)
(Hands-free
mode)
* The private mode is defi ned as the mode where
conversation is conducted with the mobile phone in
a usual manner without the hands-free function.
Note: To have a mobile phone conversation with use
of this unit, the mobile phone shall be compatible with
the Hands-Free Profi le.
History management
Making calls by history.
Note: This history mode is selectable only when an
device is paired and connected to this unit.
1
Press [MENU] .
2
Turn [VOL] clockwise or counterclockwise to
select menu “PHONE ”.
3
Press [VOL] (PUSH SEL).
4
Turn [VOL] to select “HISTORY”.
5
Press [VOL] (PUSH SEL).
6
Turn [VOL] to select each mode described
below:
“MISSED CALL”, “REC’D CALL”, “DIALED
CALL” and “DELETE MODE”.
Missed Call record
The record of missed call (up to 10 records) is saved.
d
Press [VOL] (PUSH SEL) to display the missed
call history.
The record number
indication
d
You can make a call from the missed call his-
tory:
Turn [VOL] to select displayed number or name
and then press [PHONE] or [VOL], the displayed
number or name is called.
Received Call record
The record of received call (up to 10 records) is saved.
d
Press [VOL] (PUSH SEL) to display the received
call history.
The record number
indication
d
You can make a call from the received call his-
tory:
Turn [VOL] to select displayed number or name
and then press [PHONE] or [VOL], the displayed
number or name is called.
To Next Page
Loading...
