EasyManua.ls Logo

Panasonic CR-SM4208U - Error Messages and Solutions; USB Error Codes

Panasonic CR-SM4208U
61 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
46
Fssps!Ejtqmbz!Nfttbhft
USB (MP3/WMA)
A USB device is not connected or the connected
device cannot be recognized.
!!!! Use a USB memory that is suitable for this
unit.
+KLH=U=>HAłHAOATEOP
An unsupported USB device is connected.
!!!! Use a USB memory that is suitable for this
unit.
!!!! /A?KN@łHAOPD=P?=J>ALH=UA@>=?GKJPDEO
unit onto the USB memory.
A USB device that exceeds the current capac-
ity that can be supplied is connected. For some
reason, an over-current was detected.
!!!! Use a USB memory that has a consumption
current of less than 1 A.
!!!! Switch the Source, and select the USB (MP3/
4*IK@A=C=EJ
!!!! Switch the power off/on, and select the USB
Ġ*-4*IK@A=C=EJ
!!!!
Check that the USB connector section is not dirty,
and that there is no foreign objects.
!!
!!
!
!
!
!

Related product manuals