11
Type Propeller Fan
Material PP
Motor Type Induction (8 poles)
Input Power W 146.7 - 154.9
Output Power W 80
Lo rpm 460 - 490
Outdoor Fan
Speed
Hi rpm 840 - 855
Moisture Removal L/h (Pt/h) 4.7 (9.9)
Lo m
3
/min (ft
3
/min)
Cooling: 16.5 (583) - 16.5 (583)
Heating: 17.6 (622) - 17.6 (622)
Me m
3
/min (ft
3
/min)
Cooling: 18.2 (643) - 18.2 (643)
Heating: 18.3 (645) - 18.3 (645)
Hi m
3
/min (ft
3
/min)
Cooling: 19.8 (699) - 19.8 (699)
Heating: 20.4 (720) - 20.4 (720)
Indoor Airflow
SHi m
3
/min (ft
3
/min) 20.3 (718) - 20.3 (718)
Lo m
3
/min (ft
3
/min) 30.1 (1060) - 32.0 (1130)
Outdoor
Airflow
Hi m
3
/min (ft
3
/min) 52.5 (1850) - 53.5 (1890)
Control Device Capillary Tube
Refrigerant Oil cm
3
SUNISO 4GDID or ATMOS M60 (900)
Refrigeration
Cycle
Refrigerant Type g (oz) R22, 2130 (75.2)
Height(I/D / O/D) mm (inch) 290 (11-7/16) / 750 (29-17/32)
Width (I/D / O/D) mm (inch) 1070 (42-5/32) / 875 (34-15/32)
Dimension
Depth (I/D / O/D) mm (inch) 235 (9-9/32) / 345 (13-19/32)
Weight Net (I/D / O/D) kg (lb) 12 (26) / 66 (146)
Pipe Diameter (Liquid / Gas) mm (inch) 6.35 (1/4) / 15.88 (5/8)
Standard length m (ft) 5.0 (16.4)
Length range (min – max) m (ft) 3 ~ 30 (9.8 ~ 98.4)
I/D & O/D Height different m (ft) 20.0 (65.6)
Additional Gas Amount g/m (oz/ft) 30 (0.3)
Piping
Length for Additional Gas m (ft) 7.5 (24.6)
Inner Diameter mm 12
Drain Hose
Length mm 560
Fin Material Aluminium (Pre coated)
Fin Type Slit Fin
Row x Stage x
FPI
2 x 15 x 21
Indoor Heat
Exchanger
Size (W x H x L) mm 810 x 315 x 25.4
Fin Material Aluminium (Blue coated)
Fin Type Corrugated Fin
Row x Stage x
FPI
2 x 28 x 17
Outdoor Heat
Exchanger
Size (W x H x L) mm 44.0 x 711.2 x 802.4:836.9
Material Polypropelene
Air Filter
Type One-touch
Power Supply Outdoor
Power Supply Cord A 20
Thermostat -
Protection Device Inner Protector
DRY BULB WET BULB
Maximum 32 23
Cooling
Minimum 16 11
Maximum 30 -
Indoor
Operation
Range
Heating
Minimum 16 -
To Next Page
Loading...
