M
mannchristopherAug 21, 2025
What to do if my Panasonic Air Conditioner unit does not work?
- SSheri JacksonAug 22, 2025
If your Panasonic Air Conditioner unit does not work, check if the circuit breaker is tripped and if timers have been set.
To Next PageTo Next PageWhat to do if my Panasonic Air Conditioner unit does not work?
If your Panasonic Air Conditioner unit does not work, check if the circuit breaker is tripped and if timers have been set.
What to do if my Panasonic Air Conditioner is not working efficiently in HEAT/COOL mode?
If your Panasonic Air Conditioner isn't working efficiently in HEAT or COOL mode, ensure that you set the temperature correctly, close all doors and windows, clean or replace the filters, and clear any obstructions at the air inlet and air outlet vents.
What to do if my Panasonic CS-BZ35XKE Air Conditioner remote control does not work?
If the remote control for your Panasonic Air Conditioner isn't working (display is dim or transmission signal is weak), make sure you insert the batteries correctly or replace weak batteries.
Why is the POWER indicator blinking on my Panasonic Air Conditioner before it's switched on?
The blinking POWER indicator on your Panasonic Air Conditioner before it is switched on indicates a preliminary step to prepare for the TIMER operation after it has been set. When the Timer is set to ON, the unit may start earlier (up to 35 minutes) before the actual set time to achieve the desired temperature on time.
Why is the POWER indicator blinking on my Panasonic Air Conditioner during HEAT mode?
The POWER indicator blinks during HEAT mode with no warm air supply (and flap is closed) on your Panasonic Air Conditioner because the unit is in defrost mode (and AIR SWING has been set to AUTO).
Why is the TIMER indicator always ON on my Panasonic CS-BZ35XKE Air Conditioner?
When Timer has been set on your Panasonic Air Conditioner, the Timer setting repeats daily, and the indicator stays on.
Why does my Panasonic Air Conditioner outdoor unit emit water or steam?
The outdoor unit of your Panasonic Air Conditioner emits water or steam because, during cooling operation, condensation occurs on cold pipes, and the condensed water may drip from the outdoor unit.
Why does my Panasonic Air Conditioner unit not receive the signal from the remote control?
If your Panasonic Air Conditioner unit does not receive the signal from the remote control, make sure the receiver is not obstructed. Certain fluorescent lights may interfere with the signal transmitter.
What to do if my Panasonic Air Conditioner is noisy during operation?
If your Panasonic Air Conditioner is noisy during operation, check if the unit has been installed at an incline and ensure that the front panel is closed properly.
What does it mean if the POWER INDICATOR BLINKS, THEN STOPS BLINKING DURING COOL/DRY mode on my Panasonic CS-BZ35XKE?
If the POWER INDICATOR BLINKS, THEN STOPS BLINKING DURING COOL/DRY mode on your Panasonic Air Conditioner, it means that the system has been locked to operate in HEAT mode only.
General| Brand | Panasonic |
|---|---|
| Model | CS-BZ35XKE |
| Category | Air Conditioner |
| Language | English |
