55
For CS-C18PK, CS-C24PK and CS-C28PK
SHi Hi Me HLo CLo Lo- SLo Stop
Hi o
Me o
Manual
Lo o
Normal
Auto o o o o
QHi Hi-90
QMe Me-90
Manual
QLo CLo-90
Quiet
Auto Hi-90 Me-90 o o
Manual o
Cooling
Powerful
Auto o
Manual o o
Normal
Auto o o
Manual o o
Quiet
Auto o o
Manual o o
Soft Dry
Powerful
Auto o o
Auto Fan Speed during cooling operation:
1 Indoor fan will rotate alternately between off and on as shown in below diagram.
2 At the beginning of each compressor starts operation, indoor fan speed increases gradually for deodorizing
purpose.
3 For the first time the compressor operates, indoor fan will be switched to Hi fan speed from Lo- after 70
seconds from the start of compressor. This cause the room temperature to achieve the setting temperature
quickly.
4 During compressor stops, indoor fan will operate at Lo- for the beginning 20 seconds to prevent higher
volume of refrigerant in liquid form returning to the compressor.
5 After the compressor turned off for 3 minutes, indoor fan will start to operate at Lo- to circulate the air in the
room. This is to obtain the actual reading of the intake air temperature.
6 For the resume of compressor operation, indoor fan will operate at Me fan speed to provide comfort and
lesser noise environment, after 70 seconds from the restarts of compressor.
To Next Page
Loading...
