Panasonic CS-C18PKF - Remote Control Button

76
15.2 Remote Control Button
15.2.1 SET Button
 To check current remote control transmission code and store the transmission code to EEPROM:
o Press “Set” button continuously for 10 seconds by using pointer
o Press “Timer Set” button until a “beep” sound is heard as confirmation of transmission code change.
15.2.2 RESET
 To clear and restore the remote control setting to factory default.
o Press once to clear the memory
15.2.3 TIMER ▲
 To change indoor unit indicators’ intensity:
o Press continuously for 5 seconds.
15.2.4 TIMER ▼
 To change remote control display from Degree Celsius (°C) to Degree Fahrenheit (°F)
o Press continuously for 10 seconds.