57 
For CS-C18PK, CS-C24PK and CS-C28PK 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
13.6.2 Manual Control 
  When the vertical airflow direction is set to Manual using the remote control, the automatic airflow is released and 
the airflow direction louver move up and down in the range shown in the diagram. 
  The louver can be adjusted by pressing the button to the desired louver position. 
  When stop operation using the remote control, the discharge vent is reset, and stop at the closing position. 
 
For CS-C12PK 
   
 
 
 
 
 
 
 
 
 
 
 
 
For CS-C18PK, CS-C24PK and CS-C28PK 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Closing 
position  
/ 140° 
Lower limit for cooling mode 
and soft dry mode 
Horizontal 
15° 
23°
38°
31°
45°
Upper limit for 
cooling mode and 
soft dry mode 
Upper limit for cooling mode 
and soft dry mode/5° 
30°
Closing 
position  
/ 140° 
Swing up and down 
Lower limit for cooling mode and 
soft dry mode/35° 
Horizontal 
Closing 
position  
/ 140° 
Lower limit for cooling mode 
and soft dry mode 
Horizontal 
5° 
13°
28°
21°
35°
Upper limit for 
cooling mode and 
soft dry mode