75
o Press TEMP increment or decrement button to choose No. 5.
o Press Timer increment or decrement button to select desired temperature low limit of set temperature for
HEAT mode.
Memorize new
Low2 range
Normal display mode
Press SW to enter customer zone &
Press SW’s to choose function 5
Press SW to comfirm selection
Use SW or SW to change Low1 range
SET
i) Display latest set temp (Low1).
ii) After reset, Low1 = 16°C (by default)
Range = 16°C ~ [High1]
No code transmission
o Press Timer Set button to confirm low limit selection.
o Press TEMP increment or decrement button to choose No. 6.
o Press Timer decrement or increment button to select desired temperature high limit of set temperature for
HEAT mode.
Memorize new
Normal display mode
Press SW to enter customer zone &
Press SW’s to choose function 6
Press SW to comfirm selection
Use SW or SW to change High1 range
SET
i) Display latest set temp (High1).
ii) After reset, High1 = 30°C (by default)
Range = [Low1] ~ 30°C
No code transmission
High2
range
o Press Timer Set button to confirm high limit selection.
o LCD returns to original display if remote control does not operate for 30 seconds or press Timer Cancel
button.
To Next Page
Loading...
