31
9 Operation Details
9.1. Cooling Operation
• Cooling operation can be set using remote control.
• This operation is applied to cool down the room temperature reaches the setting temperature set on the remote control.
• Cooling Operation Time Diagram.
9.2. Soft Dry Operation
• Soft Dry Operation can be set using remote control.
• Judging from compressor discharge temperature, decide the start condition to select either cool start control, or warm start con-
trol.
• Soft Dry operation is applied to dehumidify the room.
• When operation begins, the fan speed is fixed at Low speed while cooling operation is running until reaches the remote control
setting temperature.
9.3. Auto Operation
• Automatic Mode can be set using remote control.
• This operation starts to judge the intake air temperature, setting temperature. Then the unit starts to operate at determined oper-
ation mode
9.4. Fan Operation
• Fan operation can be set using remote control.
• The indoor fan is operated at High, Medium or Low speed according to remote control setting.
To Next Page
Loading...
Need help?
General
