EasyManua.ls Logo

Panasonic CS-E9PKEA - User Manual

Panasonic CS-E9PKEA
126 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
© Panasonic Corporation 2012.
Order No: PAPAMY1212049CE
Indoor Unit Outdoor Unit
CS-E9PKEA
CS-E12PKEA
CS-E15PKEA
CS-E18PKEA
CU-E9PKEA
CU-E12PKEA
CU-E15PKEA
CU-E18PKEA
Destination
Europe
PRECAUTION OF LOW TEMPERATURE
In order to avoid frostbite, be assured of no refrigerant leakage during the installation or repairing of refrigerant circuit.
This service information is designed for experienced repair technicians only and is not designed for use by the general public.
It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product.
Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any attempt to service
or repair the products dealt with in this service information by anyone else could result in serious injury or death.
WARNING

Table of Contents

Questions and Answers

  • S
    schultzstephenSep 2, 2025
    Why H33 error appears on Panasonic Air Conditioner?
    • S
      Sara ChanSep 2, 2025
      The H33 error code on your Panasonic Air Conditioner indicates that the indoor and outdoor units have different rated voltages. To solve this, check the indoor and outdoor units.
  • T
    Timothy BakerSep 13, 2025
    What does H34 error code mean on Panasonic Air Conditioner?
    • P
      phylliswoodardSep 14, 2025
      The H34 error code on your Panasonic Air Conditioner indicates that the outdoor heat sink temperature sensor is open or short circuit. Check the outdoor heat sink sensor.
  • K
    Kathleen ScottAug 31, 2025
    What does F98 error mean on my Panasonic Air Conditioner?
    • N
      Nicole VazquezAug 31, 2025
      The F98 error code on your Panasonic Air Conditioner indicates a total current protection issue. To address this, check the refrigeration system.
  • A
    Ann RobertsSep 16, 2025
    What does H24 error code mean on Panasonic CS-E9PKEA?
    • J
      Janice Jones DDSSep 16, 2025
      The H24 error code on your Panasonic Air Conditioner indicates that the indoor heat exchanger temperature sensor 2 is open or short circuit. Check the indoor heat exchanger temperature sensor 2 lead wire and connector.
  • J
    Joshua PrinceSep 15, 2025
    What does H37 error mean on a Panasonic CS-E9PKEA?
    • R
      Rodney WilsonSep 15, 2025
      The H37 error code on your Panasonic Air Conditioner indicates that the outdoor liquid pipe temperature sensor is open or short circuit. Check the outdoor liquid pipe temperature sensor lead wire and connector.
  • Y
    Yvonne SullivanSep 23, 2025
    What does H98 error code mean on Panasonic CS-E9PKEA Air Conditioner?
    • L
      Lauren CardenasSep 23, 2025
      The H98 error code on your Panasonic Air Conditioner indicates indoor high pressure protection (Heating). Check indoor heat exchanger.
  • P
    Paul DoyleAug 27, 2025
    Panasonic CS-E9PKEA Air Conditioner showing F99, what does it mean?
    • S
      Steven JeffersonAug 28, 2025
      The F99 error code on your Panasonic Air Conditioner indicates that the power transistor module is faulty or the compressor is locked. To resolve this, check the power transistor module.
  • J
    Justin BakerAug 27, 2025
    How to troubleshoot H97 error on Panasonic Air Conditioner?
    • J
      Juan SmithAug 27, 2025
      The H97 error code on your Panasonic Air Conditioner indicates that the outdoor fan motor is locked or has a feedback abnormality. Check the outdoor fan motor lead wire and connector to resolve this issue.
  • H
    Heather MartinezAug 26, 2025
    What causes F93 error on Panasonic CS-E9PKEA Air Conditioner?
    • K
      Kyle ChapmanAug 26, 2025
      The F93 error code on your Panasonic Air Conditioner can be caused by a disconnected compressor terminal, a faulty outdoor PCB, or a faulty compressor. To troubleshoot, check the compressor running condition.
  • R
    Randy VaughanAug 26, 2025
    What to do if my Panasonic CS-E9PKEA displays F95 error?
    • M
      mmeyerAug 26, 2025
      The F95 error on your Panasonic Air Conditioner indicates a cooling high pressure protection issue. It is recommended to check the refrigeration system.

Panasonic CS-E9PKEA Specifications

General IconGeneral
Cooling Capacity2.5 kW
Heating Capacity3.2 kW
RefrigerantR32
Seasonal Energy Efficiency Ratio (SEER)6.1
Power Supply220-240V, 50Hz
Energy Efficiency Class (Cooling)A++
Energy Efficiency Class (Heating)A+
Coefficient of Performance (COP)4.0
Noise Level (Outdoor Unit)45 dB
Indoor Unit Weight9 kg
Outdoor Unit Weight28 kg
TypeSplit
Noise Level (Indoor Unit)20 dB
Outdoor Unit Dimensions (W x H x D)780 x 540 x 285 mm

Related product manuals