24
How to use
Connection network using AP mode (method 2)
1
Ensure Wireless LAN LED is ON. Press and hold the Wireless LAN button for 5
seconds until “1” is shown on the remote control.
Press
until “2” is shown on the remote control and press
SET
pointing to the air
conditioner.
2
Copy the password for later use. Select “Panasonic-CS-wirelessAP” from smartphones
Wireless LAN setting and enter the copied password. Return to “Panasonic Comfort
Cloud” app.
changing the wireless network connecƟon o
smartphone to the ollowing network.
D Panasonic--wirelessAP
Password acpswi
Connection Guide
Step 1
Step 2
Step 3
Cancel
To wireless network settings of the smartphone.
Wireless LAN LED is O during the connecƟon
setup, please enable again b pressing “Wireless
LAN” buƩon once beore proceeding to step 1 .
1. Press and hold “Wireless LAN” buƩon or secs
unƟl eas seƫng “1” is shown.
2. Press “up” or “down” buƩon unƟl Adance
seƫng “2” is shown.
. Point remote control to air-condiƟoner and
press “E” buƩon once.
. AŌer step 1
hae been done, tap“Next”.
Connection Guide
Step 1
Step 2
Step 3
Cancel
Next
To wireless network settings of the smartphone.
SET
CANCEL
elect the ollowing D rom the
network list in the wireless
ŶĞƚǁŽƌŬƐĞƫŶŐƐĂŶĚĞŶƚĞƌƚŚĞ
ƉĂƐƐǁŽƌĚ
^^/WĂŶĂƐŽŶŝĐͲ^ͲǁŝƌĞůĞƐƐW
WĂƐƐǁŽƌĚZĂĐϴƉƐǁŝ
ZĞƚƵƌŶƚŽƚŚŝƐĂƉƉůŝĐĂƟŽŶĂŌĞƌ
ĐŽŵƉůĞƟŶŐƚŚĞǁŝƌĞůĞƐƐŶĞƚǁŽƌŬ
ƐĞƫŶŐƐƚŽĐŽŶƟŶƵĞƚŚĞƐĞƚƵƉ
Copy password and next
Cancel (go back to previous screen)
tŝͲ&ŝ
ƌŽƵƚĞƌ^^/ϭ
,KK^EdtKZ<
ƌŽƵƚĞƌ^^/Ϯ
WĂŶĂƐŽŶŝĐͲ^ͲǁŝƌĞůĞƐƐW
ƌŽƵƚĞƌ^^/ϯ
KƚŚĞƌ
ƐŬƚŽ:ŽŝŶEĞƚǁŽƌŬƐ
<ŶŽǁŶŶĞƚǁŽƌŬǁŝůůďĞũŽŝŶĞĚĂƵƚŽŵĂƟĐĂůůLJ/ĨŶŽŬŶŽǁŶ
ŶĞƚǁŽƌŬĂƌĞĂǀĂŝůĂďůĞLJŽƵǁŝůůďĞĂƐŬĞĚďĞĨŽƌĞũŽŝŶŝŶŐĂ
ŶĞǁŶĞƚǁŽƌŬ
tŝͲ&ŝ
^ĞƫŶŐƐ
tŝͲ&ŝ
WĂŶĂƐŽŶŝĐͲ^ͲǁŝƌĞůĞƐƐW
,KK^EdtKZ<
ƌŽƵƚĞƌ^^/Ϯ
ƌŽƵƚĞƌ^^/ϭ
ƌŽƵƚĞƌ^^/ϯ
KƚŚĞƌ
ƐŬƚŽ:ŽŝŶEĞƚǁŽƌŬƐ
<ŶŽǁŶŶĞƚǁŽƌŬǁŝůůďĞũŽŝŶĞĚĂƵƚŽŵĂƟĐĂůůLJ/ĨŶŽŬŶŽǁŶ
ŶĞƚǁŽƌŬĂƌĞĂǀĂŝůĂďůĞLJŽƵǁŝůůďĞĂƐŬĞĚďĞĨŽƌĞũŽŝŶŝŶŐĂ
ŶĞǁŶĞƚǁŽƌŬ
tŝͲ&ŝ
^ĞƫŶŐƐ
To Next Page
Loading...
Need help?
General
