Compressor Type — Rotary (1 cylinder)
rolling piston type
Motor Type — Induction (2-poles)
Rated Output W — (1 unit) 750 (2 units) 750 × 2
Air Circulation Type Cross-flow Fan Propeller Fan
Material AS + Glass Fiber 30% AES + Glass Fiber 12%
Motor Type Induction (4-poles) Induction (6-poles)
Input W 29.0 - 27.5 65.8 × 2 - 50.5 × 2
Rated Output W (1 unit) 20 (2 units) 20 × 2 (1 unit) 20 (2 units) 20 × 2
Fan Speed Low rpm 875 - 800 —
Medium rpm 1025 - 965 —
High rpm 1250 - 1210 695 - 635, 755 - 705
SuperHigh rpm 1330 - 1310 —
Heat Exchanger Description Evaporator Condenser
Tube material Copper Copper
Fin material Aluminium Aluminium
Fin Type Slit Fin Corrugated Fin
Row / Stage (Plate fin configuration, forced draft)
2 × 14 1 × 18
FPI 18 19
Size (W × H × L) mm 614 × 294 × 25.4 856 × 457.2 × 22
Refrigerant Control Device — Capillary Tube
Refrigeration Oil (c.c) — SUNISO 4GDID or ATMOS M60
(350 × 2)
Refrigerant (R-22) g (oz) — 890 × 2 (31.4 × 2)
Thermostat Electronic Control —
Protection Device — Overload Protector
Capillary Tube Length mm — Cooling; 1,033, Heating; 585
Flow Rate l/min — Cooling; 4.8, Heating; 9.9
Inner Diameter mm — Cooling; 1.2, Heating; 1.4
Air Filter Material
Style
(c.c) P.P.
Honeycomb
—
Capacity Control Capillary Tube
Compressor Capacitor µF, VAC — 25 µF, 370VAC
Fan Motor Capacitor µF, VAC 1.0 µF, 400VAC (Upper unit) 1.0 µF, 400VAC
(Lower unit) 1.2 µF, 400VAC
•
Specifications are subject to change without notice for further improvement.
9
CS-MA95KE CU-MA185KE / CS-MA125KE CU-MA245KE / CS-MA75KE / CS-MA125KE CU-MA195KE
To Next Page