9.3.3. Forced Cooling Operation Control
·
Forced cooling operations can be performed by the outdoor unit.
1. Set the operation mode setting switch (SW2) to COOL.
2. The forced cooling operation is performed when the forced operation
switch (SW1) is pressed.
* The forced cooling operation stops when the forced operation
switch (SW1) is pressed again.
47
CS-ME7CKPG / CS-ME10CKPG / CS-ME12CKPG / CS-ME14CKPG / CS-ME18CKPG / CU-2E15CBPG / CU-2E18CBPG / CU-3E23CBPG / CU-4E27CBPG