Panasonic CS-PE9CKE

4.Fan Speed Button
2. Shift time of the Mode selection button
a. Single press
b. Keep depressed( less than 500ms)
c. Keep depressed continuously
If the ON/OFF button is pressed after the operation mode is set, or change the operation mode during operation, or the signal
is received from the remote controller, the indoor indicator will flash or light up to start the operation.
1. The display on the remote controller changes as follow by pressing the AIR SWING button.
2. If the ON/OFF button is pressed after the fan speed mode is set, or change the fan speed mode during operation, or the signal
is received from the remote controller, the indoor indicator will flash or light up to start the operation.
3. The shift time of the fan speed button is the same to that of mode selection button.
16
CS-PE9CKE / CU-PE9CKE / CS-PE12CKE / CU-PE12CKE
Panasonic ilmalämpöpumput korjaa ja huoltaa pääkaupunkiseudulla: Jäähdytinpalvelu RefGroup Oy
www.ilmalämpöpumput.com